[MGX] Handguard - K12 Kit

Welcome to the MGX MarkerSmith
-All MGX MarkerSmith parts are compatible with each other.
-Some MGX MS parts are essential to the proper function of the bodykit, therefore:
-You need to have 1x Core Lower and 1x Core Upper for MGX to work.
-All other parts are optional.
 
MGX Showcase Video
 
[MGX] Handguard - K12 Kit
The K12 kit is our most accurate AK conversion to date, using the MGX platform and raises the autenticity to another level. Chosing either KSpec or Alpha uppers as a base we were able to create a new type of handguard that has a high top rail position which matches AK proportions much better than our KSpec series alone. 

The Front post is compatible with all straight barrels with shims for 21.5 and 22.5mm diameter barrels

Options
-With KSpec Upper's top mounting features we can add a new K12 full rail that matches the K12 handguard perfectly. Pick this upgrade if you already have the KSpec upper. Additionally with this kit we will add a new Modernize charge handle and special K12 Rear Sight that fits on all MGX stock mounts.
-With Alpha Upper we can achieve a similar result by adding a rail riser to match the handguard height perfectly aswell. Pick this if you have the Alpha Upper already.

For assembly
A) Alpha Uppers:
-Slide on top rail without setting the screw. Tighten it only after attachming the handguard to confirm the rails position.
B) KSpec Uppers:
-Remove any other KSpec upper attachments (Sight, Rail Mount or other TopRails)
-Press fit the included M4 nuts in the 3 and 5 positions on the top inside part of the upper. By default there are only nuts in the 1 and 2 positions.
-Align the top rail halves together with the flat side forward and secure it with the 3 provided screws that match the embeded nuts on the upper.
-Disconnect the K12 front sight from the handguard by pulling the sight forward. it is pressure fit.
-Attach your barrel of choice
-Slide handguard over barrel and push until the handguard clicks into place without loosening any screws on the handguard. To detach simply pull firmly forward and let the MGX Clips do their job.
-slide on the required shim feature 
-Loosen